1. The lid switch or door lock
The most common cause, especially on top-loaders. The switch wears, the machine thinks the lid is up, and spin is locked out while everything else works. On front-loaders it's the door lock assembly, same idea. Both are modest repairs.
2. It can't drain, so it won't spin
Washers spin only after draining. A clogged pump trap (check yours for coins and socks), a kinked hose, or a dying pump leaves water in the tub and the spin never starts. If you hear humming from the bottom, that's the pump straining.
3. Belt, coupler, and the load itself
A stretched belt or broken motor coupler lets the motor run without driving the tub. And the humble unbalanced load, one heavy blanket wrapped around the agitator, will shut down spin attempts too. Redistribute once; if it keeps happening on normal loads, it's mechanical.

The Pump Trap Most People Never Clean
Front-load washers have a pump trap, usually behind a small door at the bottom front of the machine, and it is the most overlooked maintenance item in the laundry room. Coins, socks, hair ties and small objects collect there, and when the trap clogs, the washer cannot drain, so it will not spin. Top-loaders have their own version of the same story: a drain hose kinked behind the machine, or a pump straining against a clog. Checking the trap takes five minutes and a towel on the floor, and it is the first thing a tech checks on a washer that fills but will not spin.
Related Services
Related Reading
Questions & Answers
Does this problem fix itself?
Almost never. Appliance faults like these either stay the same or get worse with use, and the secondary damage (spoiled food, water damage, overheated parts) is what gets expensive. Catching it early is the cheap option.
Can I safely check anything myself?
Yes: the checks described in this article are the safe ones (settings, vents, filters, temperatures with a thermometer). Anything involving gas lines, sealed refrigerant, or microwave high-voltage parts is a technician job.
How much will the repair cost?
It depends on which cause your appliance has, which is what the diagnosis is for. Our cost guide publishes typical ranges for each service, and your exact price is quoted upfront before work starts.
How fast can you come out?
Same-day or next-day in the Hartsville area during business hours when you call early, and 24/7 for emergencies like leaks and warming fridges. Call (615) 583-1836.
My washer drains but still will not spin. What is next?
If the tub is empty and spin still will not start, the lid switch or door lock is the next suspect, then the belt or motor coupler. The machine thinks the lid is up, or the motor is running without driving the tub. Both are modest repairs, and both are tested with a meter rather than guessed at.
Can an unbalanced load damage the washer?
Yes, over time. One heavy blanket wrapped around the agitator will shut down a spin cycle, and repeated violent shaking wears the suspension and the bearings. Redistribute the load once; if it keeps happening on normal loads, the suspension is likely worn and it is a repair, not a loading problem.
