1 and 2: the switch and the temperature
Find the bail arm (wire arm up = off) or the maker's power switch; arms get bumped up by ice bags constantly. Then check the freezer temperature: makers cycle reliably only at about 0°F. At 8–10°F the maker slows or stops even though food still feels frozen.
3: water, the quiet culprit
Does the door water dispenser work? If water flow is weak there too, suspect the filter (overdue?) or the supply. Ice makers fed by saddle valves on Hartsville well-water lines clog steadily with mineral scale; hollow, small cubes are the early warning of low flow.
When the maker itself has failed
If the switch is on, the freezer is at 0°F, water pressure is good, and there's still no ice after 24 hours, the maker module or inlet valve has failed. Both are standard replacements, and on the visit we test which one it is electrically rather than swapping both.

Freezer Temperature Is the First Number to Check
Before touching the ice maker, check the freezer temperature with a thermometer. Makers cycle reliably only at about 0 degrees, and at 8 to 10 degrees the maker slows or stops even though the food still feels frozen. That one number separates a maker problem from a freezer problem, and it is the first thing a tech checks on an ice maker call. If the freezer is at 0 and there is still no ice after 24 hours, the problem is the water supply or the maker itself, and the visit tests which one it is electrically rather than swapping both.
Related Services
Related Reading
Questions & Answers
Does this problem fix itself?
Almost never. Appliance faults like these either stay the same or get worse with use, and the secondary damage (spoiled food, water damage, overheated parts) is what gets expensive. Catching it early is the cheap option.
Can I safely check anything myself?
Yes: the checks described in this article are the safe ones (settings, vents, filters, temperatures with a thermometer). Anything involving gas lines, sealed refrigerant, or microwave high-voltage parts is a technician job.
How much will the repair cost?
It depends on which cause your appliance has, which is what the diagnosis is for. Our cost guide publishes typical ranges for each service, and your exact price is quoted upfront before work starts.
How fast can you come out?
Same-day or next-day in the Hartsville area during business hours when you call early, and 24/7 for emergencies like leaks and warming fridges. Call (615) 583-1836.
How long should I wait for ice after a repair?
Give it a full 24 hours. A maker needs the freezer at about 0 degrees and a full cycle to start producing, and the first batch can be small. If there is still no ice after 24 hours with the freezer at temperature, call us back and we will recheck the valve and the maker module.
My door water works but the ice maker does not. What does that mean?
It means the main water supply is fine, so the problem is specific to the maker: the inlet valve, the fill tube, or the maker module itself. A frozen fill tube is a common cause, and it is fixed by clearing the tube and checking why it froze, not just by thawing it.
